← Florida

Tap water quality report

Belleview, City of (3 Wps)

EPA monitoring tested this supplier for 98 contaminants and detected 13. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

98
contaminants tested
13
detected
9,358
people served
8
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Marion

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

8
health-based violations
67
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 1999-05-01 → 1999-05-31
MCL Health-based Resolved 1999-05-01 → 1999-05-31
MCL Health-based Resolved 1999-05-01 → 1999-05-31
MCL Health-based Archived 1998-07-01 → 1998-07-31
MCL Health-based Resolved 1995-09-01 → 1995-09-30
MCL Health-based Resolved 1995-08-01 → 1995-08-31
MCL Health-based Resolved 1995-01-01 → 1995-01-31
MCL Health-based Archived 1993-08-01 → 1993-08-31
MR Monitoring Resolved 2017-01-01 → 2017-12-31
MR Monitoring Resolved 2017-01-01 → 2017-12-31

PFAS detected

PFAS are industrial “forever chemicals”. These are the EPA's latest nationwide test results (2023–2025).
ContaminantMaxDetection ratePeriod
PFOS 0.0056 µg/L 1/4 2023

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
1605.5 µg/L 16%
of the EPA limit 10000 µg/L
worst single sample: 1710 µg/L
40/40 SYR4 2012–2019
Lead
0.0047 mg/L 31%
of the EPA limit 0.0150 mg/L
15/15 LCR 2025
Fluoride
210 µg/L 5.3%
of the EPA limit 4000 µg/L
8/8 SYR4 2014–2017
TTHM
4.261 µg/L 5.3%
of the EPA limit 80 µg/L
worst single sample: 5.53 µg/L
7/10 SYR4 2014–2019
Arsenic
1.6 µg/L 16%
of the EPA limit 10 µg/L
4/4 SYR4 2014–2017
Barium
9.65 µg/L 0.5%
of the EPA limit 2000 µg/L
worst single sample: 9.8 µg/L
4/4 SYR4 2014–2017
Copper
3.955 µg/L 0.3%
of the EPA limit 1300 µg/L
worst single sample: 4.3 µg/L
4/4 SYR4 2014–2017
Chromium
1.41 µg/L 1.4%
of the EPA limit 100 µg/L
worst single sample: 1.5 µg/L
4/4 SYR4 2014–2017
Selenium
3.3 µg/L 6.6%
of the EPA limit 50 µg/L
worst single sample: 3.5 µg/L
3/4 SYR4 2014–2017
Total Haloacetic Acids (HAA5)
3.1385 µg/L 5.2%
of the EPA limit 60 µg/L
worst single sample: 3.15 µg/L
2/10 SYR4 2014–2019
Antimony, Total
0.1000 µg/L 1.7%
of the EPA limit 6 µg/L
1/4 SYR4 2014–2017
Thallium, Total
0.1000 µg/L 5%
of the EPA limit 2 µg/L
1/4 SYR4 2014–2017
85 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoLeadMercuryMethoxychlorNetfosaaNfdhaNmefosaaNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
L.R. TITTERINGTON, P.E.
Phone
352-233-2110

Frequently asked questions about Belleview, City of (3 Wps)

Is Belleview, City of (3 Wps) tap water safe to drink?

EPA monitoring detected 13 contaminants in Belleview, City of (3 Wps)'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Belleview, City of (3 Wps)'s water?

EPA monitoring detected Nitrate, Lead, Fluoride, TTHM, Arsenic, and others. The full list with the level and data source for each is above.

How many people does Belleview, City of (3 Wps) serve?

Belleview, City of (3 Wps) reports serving 9,358 people in Florida, per its EPA record.

Has Belleview, City of (3 Wps) had any water quality violations?

The EPA has 67 violations on file for Belleview, City of (3 Wps), of which 8 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.