Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Archived | 2024-09-01 → 2024-09-30 |
| MR | Monitoring | Archived | 2024-09-01 → 2024-09-30 |
| MON | Monitoring | Resolved | 2015-01-01 → 2015-01-31 |
| MR | Monitoring | Resolved | 2015-01-01 → 2015-01-31 |
| MR | Monitoring | Resolved | 2014-11-01 → 2014-11-30 |
| MR | Monitoring | Resolved | 2014-10-01 → 2014-10-31 |
| MR | Monitoring | Resolved | 2013-10-01 → 2013-10-31 |
| MR | Monitoring | Resolved | 2013-10-01 → 2013-10-31 |
| MR | Monitoring | Resolved | 2013-10-01 → 2013-10-31 |
| MR | Monitoring | Resolved | 2013-10-01 → 2013-10-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.00020 mg/L 1.3% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2024 |
| Nitrate | 470 µg/L 4.7% of the EPA limit 10000 µg/L | 16/18 | SYR4 | 2012–2019 |
| Fluoride | 130 µg/L 3.3% of the EPA limit 4000 µg/L | 4/6 | SYR4 | 2012–2018 |
| Barium | 4.7 µg/L 0.2% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Copper | 2.6 µg/L 0.2% of the EPA limit 1300 µg/L | 3/3 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 15 µg/L 25% of the EPA limit 60 µg/L | 3/4 | SYR4 | 2012–2018 |
| TTHM | 7.09 µg/L 8.9% of the EPA limit 80 µg/L | 2/4 | SYR4 | 2012–2018 |
| 2,4-D | 0.3180 µg/L 0.5% of the EPA limit 70 µg/L | 1/6 | SYR4 | 2012–2019 |
| Antimony, Total | 0.2000 µg/L 3.3% of the EPA limit 6 µg/L | 1/3 | SYR4 | 2012–2018 |
| Arsenic | 0.8000 µg/L 8% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2012–2018 |
| Cyanide | 11 µg/L 5.5% of the EPA limit 200 µg/L | 1/3 | SYR4 | 2012–2018 |
| Ethylbenzene | 0.6600 µg/L 0.1% of the EPA limit 700 µg/L | 1/7 | SYR4 | 2012–2019 |
| Selenium | 0.8000 µg/L 1.6% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2012–2018 |
| Xylenes, Total | 1.46 µg/L 0% of the EPA limit 10000 µg/L | 1/7 | SYR4 | 2012–2019 |
54 contaminants tested, none detected
Utility contact
Frequently asked questions about Diamond Point
Is Diamond Point tap water safe to drink?
EPA monitoring detected 14 contaminants in Diamond Point's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Diamond Point's water?
EPA monitoring detected Lead, Nitrate, Fluoride, Barium, Copper, and others. The full list with the level and data source for each is above.
How many people does Diamond Point serve?
Diamond Point reports serving 250 people in Ohio, per its EPA record.
Has Diamond Point had any water quality violations?
The EPA has 59 violations on file for Diamond Point, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.