Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2009-08-01 → 2009-08-31 |
| MCL | Health-based | Archived | 2009-08-01 → 2009-08-31 |
| MCL | Health-based | Archived | 2008-08-01 → 2008-08-31 |
| MCL | Health-based | Archived | 2008-08-01 → 2008-08-31 |
| MCL | Health-based | Archived | 1992-12-01 → 1992-12-31 |
| MR | Monitoring | Resolved | 2015-01-01 |
| MR | Monitoring | Archived | 2009-03-01 → 2009-03-31 |
| MR | Monitoring | Archived | 2009-03-01 → 2009-03-31 |
| MR | Monitoring | Archived | 2009-01-01 → 2009-01-31 |
| MR | Monitoring | Archived | 2009-01-01 → 2009-01-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 948 µg/L 24% of the EPA limit 4000 µg/L
worst single sample: 1050 µg/L | 38/38 | SYR4 | 2012–2018 |
| Barium | 16 µg/L 0.8% of the EPA limit 2000 µg/L | 19/19 | SYR4 | 2012–2018 |
| Lead | 0.0092 mg/L 61% of the EPA limit 0.0150 mg/L | 19/19 | LCR | 2023 |
| Copper | 37.9 µg/L 2.9% of the EPA limit 1300 µg/L
worst single sample: 47 µg/L | 8/19 | SYR4 | 2012–2018 |
| Antimony, Total | 2.075 µg/L 35% of the EPA limit 6 µg/L
worst single sample: 2.1 µg/L | 6/19 | SYR4 | 2012–2018 |
| Nitrate | 100 µg/L 1% of the EPA limit 10000 µg/L | 6/128 | SYR4 | 2012–2019 |
| TTHM | 12.95 µg/L 16% of the EPA limit 80 µg/L
worst single sample: 13 µg/L | 6/7 | SYR4 | 2014–2019 |
| Beryllium, Total | 0.1000 µg/L 2.5% of the EPA limit 4 µg/L | 5/19 | SYR4 | 2012–2018 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 3/19 | SYR4 | 2012–2018 |
| Cyanide | 4 µg/L 2% of the EPA limit 200 µg/L | 3/19 | SYR4 | 2012–2018 |
| Cadmium | 0.1000 µg/L 2% of the EPA limit 5 µg/L | 3/19 | SYR4 | 2012–2018 |
| Nitrite | 10 µg/L 1% of the EPA limit 1000 µg/L | 3/64 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 2.697 µg/L 4.5% of the EPA limit 60 µg/L
worst single sample: 2.9 µg/L | 3/7 | SYR4 | 2014–2019 |
| Carbon Tetrachloride | 0.2795 µg/L 5.6% of the EPA limit 5 µg/L
worst single sample: 0.2800 µg/L | 2/26 | SYR4 | 2012–2018 |
| Chromium | 3.92 µg/L 3.9% of the EPA limit 100 µg/L
worst single sample: 4 µg/L | 2/19 | SYR4 | 2012–2018 |
| Lead | 3.48 µg/L 23% of the EPA limit 15 µg/L
worst single sample: 3.5 µg/L | 2/19 | SYR4 | 2012–2018 |
| Lithium | 9.1 µg/L No EPA limit set | 2/16 | UCMR-5 | 2024 |
82 contaminants tested, none detected
Utility contact
Frequently asked questions about Eglin Main
Is Eglin Main tap water safe to drink?
EPA monitoring detected 17 contaminants in Eglin Main's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Eglin Main's water?
EPA monitoring detected Fluoride, Barium, Lead, Copper, Antimony, Total, and others. The full list with the level and data source for each is above.
How many people does Eglin Main serve?
Eglin Main reports serving 4,169 people in Florida, per its EPA record.
Has Eglin Main had any water quality violations?
The EPA has 22 violations on file for Eglin Main, of which 5 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.