Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2006-01-01 → 2006-01-31 |
| MR | Monitoring | Resolved | 2006-01-01 → 2006-01-31 |
| MR | Monitoring | Resolved | 2006-01-01 → 2006-01-31 |
| MR | Monitoring | Resolved | 2003-01-01 |
| MR | Monitoring | Resolved | 2003-01-01 |
| MR | Monitoring | Resolved | 2003-01-01 |
| Other | Monitoring | Resolved | 2002-07-01 → 2002-07-25 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 6.89 µg/L No EPA limit set | 113/117 | SYR4 | 2013–2019 |
| Chloroform | 30.8 µg/L No EPA limit set | 113/117 | SYR4 | 2013–2019 |
| TTHM | 38.8 µg/L 49% of the EPA limit 80 µg/L | 103/103 | SYR4 | 2013–2019 |
| Copper | 179 µg/L 14% of the EPA limit 1300 µg/L | 101/102 | SYR4 | 2012–2018 |
| Dichloroacetic Acid | 11.9 µg/L No EPA limit set | 96/97 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 24.4 µg/L 41% of the EPA limit 60 µg/L | 96/97 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 14.3 µg/L No EPA limit set | 96/97 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.76 µg/L No EPA limit set | 87/117 | SYR4 | 2013–2019 |
| Lead | 76 µg/L 507% of the EPA limit, in the worst sample — 15 µg/L | 33/103 | SYR4 | 2012–2018 |
| Fluoride | 800 µg/L 20% of the EPA limit 4000 µg/L | 18/38 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2024 |
| Lithium | 17.4 µg/L No EPA limit set | 9/10 | UCMR-5 | 2025 |
| Chromium | 6 µg/L 6% of the EPA limit 100 µg/L | 7/10 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 1.574 µg/L No EPA limit set | 7/97 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 2.06 pCi/L 41% of the EPA limit 5 pCi/L | 4/4 | SYR4 | 2013–2019 |
| Cyanide | 78 µg/L 39% of the EPA limit 200 µg/L | 1/4 | SYR4 | 2019 |
66 contaminants tested, none detected
Frequently asked questions about Camden Pump District
Is Camden Pump District tap water safe to drink?
EPA monitoring detected 16 contaminants in Camden Pump District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Camden Pump District's water?
EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Copper, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Camden Pump District serve?
Camden Pump District reports serving 17,208 people, per its EPA record.
Has Camden Pump District had any water quality violations?
The EPA has 7 violations on file for Camden Pump District, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.