Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2024-07-01 → 2024-09-30 |
| MR | Monitoring | Resolved | 2024-07-01 → 2024-09-30 |
| MR | Monitoring | Resolved | 2024-07-01 → 2024-09-30 |
| RPT | Monitoring | Resolved | 2024-07-01 |
| RPT | Monitoring | Resolved | 2024-07-01 |
| RPT | Monitoring | Resolved | 2024-07-01 |
| MON | Monitoring | Resolved | 2024-03-01 → 2024-03-31 |
| MON | Monitoring | Resolved | 2024-03-01 → 2024-03-31 |
| MON | Monitoring | Resolved | 2024-03-01 → 2024-03-31 |
| MR | Monitoring | Resolved | 2024-01-01 → 2024-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 4100 µg/L 41% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.00050 mg/L 3.3% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| TTHM | 17.8 µg/L 22% of the EPA limit 80 µg/L | 4/5 | SYR4 | 2013–2019 |
| Barium | 51 µg/L 2.6% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2013–2019 |
| Bromoform | 5.2 µg/L No EPA limit set | 3/4 | SYR4 | 2016–2019 |
| Fluoride | 160 µg/L 4% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2013–2019 |
| Selenium | 1.2 µg/L 2.4% of the EPA limit 50 µg/L | 3/3 | SYR4 | 2013–2019 |
| Arsenic | 1.2 µg/L 12% of the EPA limit 10 µg/L | 2/3 | SYR4 | 2013–2019 |
| Bromodichloromethane | 2.5 µg/L No EPA limit set | 2/4 | SYR4 | 2016–2019 |
| Chloroform | 1.9 µg/L No EPA limit set | 2/4 | SYR4 | 2016–2019 |
| Dibromochloromethane | 4.4 µg/L No EPA limit set | 2/4 | SYR4 | 2016–2019 |
| Combined Uranium | 1.9 µg/L 6.3% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2019 |
| Nitrate-Nitrite | 1500 µg/L 15% of the EPA limit 10000 µg/L | 1/1 | SYR4 | 2016 |
| Total Haloacetic Acids (HAA5) | 1 µg/L 1.7% of the EPA limit 60 µg/L | 1/3 | SYR4 | 2013–2019 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about Starwood Metropolitan District
Is Starwood Metropolitan District tap water safe to drink?
EPA monitoring detected 14 contaminants in Starwood Metropolitan District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Starwood Metropolitan District's water?
EPA monitoring detected Nitrate, Lead, TTHM, Barium, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Starwood Metropolitan District serve?
Starwood Metropolitan District reports serving 300 people in Colorado, per its EPA record.
Has Starwood Metropolitan District had any water quality violations?
The EPA has 44 violations on file for Starwood Metropolitan District, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.