Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2011-10-01 → 2011-10-31 |
| MR | Monitoring | Resolved | 2011-10-01 → 2011-10-31 |
| MR | Monitoring | Resolved | 2007-01-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2007-01-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2006-01-01 → 2006-12-31 |
| MR | Monitoring | Resolved | 2006-01-01 → 2006-12-31 |
| MR | Monitoring | Resolved | 2001-03-01 |
| MR | Monitoring | Resolved | 2001-03-01 |
| MR | Monitoring | Resolved | 1993-07-01 |
| Other | Monitoring | Archived | 1984-09-01 → 1984-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2024 |
| Arsenic | 19.2 µg/L 192% of the EPA limit, at the 95th percentile of samples — 10 µg/L
worst single sample: 21 µg/L | 13/13 | SYR4 | 2012–2019 |
| Dibromochloromethane | 16.62 µg/L No EPA limit set
worst single sample: 18 µg/L | 3/3 | SYR4 | 2014–2018 |
| TTHM | 39.9 µg/L 50% of the EPA limit 80 µg/L
worst single sample: 42 µg/L | 3/3 | SYR4 | 2014–2018 |
| Bromodichloromethane | 7.355 µg/L No EPA limit set
worst single sample: 7.4 µg/L | 2/3 | SYR4 | 2014–2018 |
| Bromoform | 13.3385 µg/L No EPA limit set
worst single sample: 14 µg/L | 2/3 | SYR4 | 2014–2018 |
| Chloroform | 9.235 µg/L No EPA limit set
worst single sample: 9.6 µg/L | 2/3 | SYR4 | 2014–2018 |
| Dibromoacetic Acid | 3.8265 µg/L No EPA limit set
worst single sample: 3.97 µg/L | 2/3 | SYR4 | 2014–2018 |
| Fluoride | 299 µg/L 7.5% of the EPA limit 4000 µg/L
worst single sample: 300 µg/L | 2/2 | SYR4 | 2012–2014 |
| Total Haloacetic Acids (HAA5) | 8.1395 µg/L 14% of the EPA limit 60 µg/L
worst single sample: 8.51 µg/L | 2/3 | SYR4 | 2014–2018 |
| Dichloroacetic Acid | 2.81 µg/L No EPA limit set | 1/3 | SYR4 | 2014–2018 |
| Trichloroacetic Acid | 1.73 µg/L No EPA limit set | 1/3 | SYR4 | 2014–2018 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Colonial Park
Is Colonial Park tap water safe to drink?
EPA monitoring detected 12 contaminants in Colonial Park's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Colonial Park's water?
EPA monitoring detected Lead, Arsenic, Dibromochloromethane, TTHM, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Colonial Park serve?
Colonial Park reports serving 342 people in California, per its EPA record.
Has Colonial Park had any water quality violations?
The EPA has 14 violations on file for Colonial Park, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.