Tap WaterIndex

← California

Tap water quality report

Canyon Creek Mhp

EPA monitoring tested this supplier for 41 contaminants and detected 3. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

41
contaminants tested
3
detected
35
people served
0
health-based violations
California rankingsLead in CaliforniaPFAS in California
Water source
Ground water
Ownership
Private
Counties served
Shasta

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
8
violations on file
0
still open
ViolationTypeStatusPeriod
MON Monitoring Resolved 2020-10-01 → 2020-10-31
MON Monitoring Resolved 2020-10-01 → 2020-10-31
MR Monitoring Resolved 2009-10-01 → 2009-10-31
MR Monitoring Resolved 2009-10-01 → 2009-10-31
MR Monitoring Resolved 1993-07-01
Other Monitoring Archived 1984-07-01 → 1984-07-31
MR Monitoring Archived 1981-10-01 → 1982-09-30
MR Monitoring Archived 1980-10-30 → 1981-10-29

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
1235.5 µg/L 12%
of the EPA limit 10000 µg/L
worst single sample: 1240 µg/L
30/32 SYR4 2012–2019
Lead
0.0020 mg/L 13%
of the EPA limit 0.0150 mg/L
 12/12 LCR 2023
Fluoride
200 µg/L 5%
of the EPA limit 4000 µg/L
 2/2 SYR4 2014
38 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-DichloropropaneAntimony, TotalArsenicBariumBenzeneBeryllium, TotalBromodichloromethaneBromoformChlorobenzeneCopperCadmiumCarbon TetrachlorideChloroformChromiumDichloromethaneDibromochloromethaneEthylbenzeneLeadMercuryNitriteSeleniumStyreneTTHMTetrachloroethyleneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
CHRISMAN, TAMI
Phone
530-510-7831
Email
qpmcalifornia@gmail.com

Frequently asked questions about Canyon Creek Mhp

Is Canyon Creek Mhp tap water safe to drink?

EPA monitoring detected 3 contaminants in Canyon Creek Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Canyon Creek Mhp's water?

EPA monitoring detected Nitrate, Lead, Fluoride. The full list with the level and data source for each is above.

How many people does Canyon Creek Mhp serve?

Canyon Creek Mhp reports serving 35 people in California, per its EPA record.

Has Canyon Creek Mhp had any water quality violations?

The EPA has 8 violations on file for Canyon Creek Mhp, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.