Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2008-09-01 → 2008-09-30 |
| MCL | Health-based | Resolved | 2008-09-01 → 2008-09-30 |
| MCL | Health-based | Resolved | 1997-05-01 → 1997-05-31 |
| MCL | Health-based | Resolved | 1997-05-01 → 1997-05-31 |
| MCL | Health-based | Resolved | 1997-05-01 → 1997-05-31 |
| MCL | Health-based | Resolved | 1993-04-01 → 1993-04-30 |
| MCL | Health-based | Resolved | 1993-04-01 → 1993-04-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 20000 µg/L 200% of the EPA limit, in the worst sample — 10000 µg/L | 2142/2260 | SYR4 | 2012–2019 |
| TTHM | 73 µg/L 91% of the EPA limit 80 µg/L | 124/124 | SYR4 | 2012–2019 |
| Bromodichloromethane | 18 µg/L No EPA limit set | 123/124 | SYR4 | 2012–2019 |
| Chloroform | 50 µg/L No EPA limit set | 123/124 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 9.4 µg/L No EPA limit set | 123/124 | SYR4 | 2012–2019 |
| Dibromochloromethane | 22 µg/L No EPA limit set | 123/124 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 29 µg/L No EPA limit set | 123/124 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 56 µg/L 93% of the EPA limit 60 µg/L | 123/124 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 23 µg/L No EPA limit set | 120/124 | SYR4 | 2012–2019 |
| Bromoform | 17 µg/L No EPA limit set | 104/124 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 68/68 | LCR | 2024 |
| Monobromoacetic Acid | 1.8 µg/L No EPA limit set | 13/124 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3 µg/L No EPA limit set | 11/124 | SYR4 | 2012–2019 |
| Fluoride | 200 µg/L 5% of the EPA limit 4000 µg/L | 9/9 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 8400 µg/L 84% of the EPA limit 10000 µg/L | 4/4 | SYR4 | 2017–2019 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 1/9 | SYR4 | 2013–2019 |
66 contaminants tested, none detected
Utility contact
Frequently asked questions about City of Grover Beach Public Works Dept
Is City of Grover Beach Public Works Dept tap water safe to drink?
EPA monitoring detected 16 contaminants in City of Grover Beach Public Works Dept's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Grover Beach Public Works Dept's water?
EPA monitoring detected Nitrate, TTHM, Bromodichloromethane, Chloroform, Dibromoacetic Acid, and others. The full list with the level and data source for each is above.
How many people does City of Grover Beach Public Works Dept serve?
City of Grover Beach Public Works Dept reports serving 12,701 people in California, per its EPA record.
Has City of Grover Beach Public Works Dept had any water quality violations?
The EPA has 7 violations on file for City of Grover Beach Public Works Dept, of which 7 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.