Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2013-06-07 |
| MR | Monitoring | Resolved | 2013-06-07 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 20114 µg/L 201% of the EPA limit, in the worst sample — 10000 µg/L | 5092/5758 | SYR4 | 2012–2019 |
| 1,2-DIBROMO-3-CHLOROPROPANE | 0.5300 µg/L 265% of the EPA limit, in the worst sample — 0.2000 µg/L | 504/1104 | SYR4 | 2012–2019 |
| TTHM | 82 µg/L 102% of the EPA limit, in the worst sample — 80 µg/L | 203/262 | SYR4 | 2012–2019 |
| Dibromochloromethane | 33 µg/L No EPA limit set | 196/280 | SYR4 | 2012–2019 |
| Bromoform | 32 µg/L No EPA limit set | 182/291 | SYR4 | 2012–2019 |
| Bromodichloromethane | 24 µg/L No EPA limit set | 180/271 | SYR4 | 2012–2019 |
| Chloroform | 24.7 µg/L No EPA limit set | 169/266 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 18.1 µg/L 30% of the EPA limit 60 µg/L | 132/283 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 10.4 µg/L No EPA limit set | 130/285 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 6.2 µg/L No EPA limit set | 99/283 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 5 µg/L No EPA limit set | 78/284 | SYR4 | 2012–2019 |
| Fluoride | 300 µg/L 7.5% of the EPA limit 4000 µg/L | 32/36 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 27/27 | LCR | 2025 |
| Nitrate-Nitrite | 17000 µg/L 170% of the EPA limit, in the worst sample — 10000 µg/L | 20/20 | SYR4 | 2016–2019 |
| Arsenic | 5.9 µg/L 59% of the EPA limit 10 µg/L | 16/33 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.3 µg/L No EPA limit set | 16/292 | SYR4 | 2012–2019 |
| 1,1-Dichloroethylene | 0.5200 µg/L 7.4% of the EPA limit 7 µg/L | 3/35 | SYR4 | 2012–2019 |
| Copper | 98 µg/L 7.5% of the EPA limit 1300 µg/L | 1/36 | SYR4 | 2012–2019 |
| Chromium | 12 µg/L 12% of the EPA limit 100 µg/L | 1/33 | SYR4 | 2012–2019 |
| Lead | 8.4 µg/L 56% of the EPA limit 15 µg/L | 1/33 | SYR4 | 2012–2019 |
| Tetrachloroethylene | 0.6400 µg/L 13% of the EPA limit 5 µg/L | 1/35 | SYR4 | 2012–2019 |
| Trichloroethylene | 0.5800 µg/L 12% of the EPA limit 5 µg/L | 1/35 | SYR4 | 2012–2019 |
83 contaminants tested, none detected
Utility contact
Frequently asked questions about Monte Vista Wd
Is Monte Vista Wd tap water safe to drink?
EPA monitoring detected 27 contaminants in Monte Vista Wd's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Monte Vista Wd's water?
EPA monitoring detected Nitrate, 1,2-DIBROMO-3-CHLOROPROPANE, TTHM, Dibromochloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Monte Vista Wd serve?
Monte Vista Wd reports serving 56,017 people in California, per its EPA record.
Has Monte Vista Wd had any water quality violations?
The EPA has 2 violations on file for Monte Vista Wd, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.