Tap WaterIndex

← California

Tap water quality report

Liberty-Bellview Heights

EPA monitoring tested this supplier for 43 contaminants and detected 4. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

43
contaminants tested
4
detected
155
people served
0
health-based violations
California rankingsLead in CaliforniaPFAS in California
Water source
Ground water
Ownership
Private
Counties served
San Bernardino

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
3
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Resolved 1993-07-01 → 2000-03-01
MR Monitoring Archived 1981-10-01 → 1982-09-30
MR Monitoring Archived 1980-10-30 → 1981-10-29

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Lead
0.00029 mg/L 1.9%
of the EPA limit 0.0150 mg/L
 5/5 LCR 2025
Arsenic
4.4 µg/L 44%
of the EPA limit 10 µg/L
 1/1 SYR4 2018
Chromium
2.3 µg/L 2.3%
of the EPA limit 100 µg/L
 1/1 SYR4 2018
Fluoride
280 µg/L 7%
of the EPA limit 4000 µg/L
 1/1 SYR4 2018
39 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-DichloropropaneAntimony, TotalBariumBenzeneBeryllium, TotalBromodichloromethaneBromoformChlorobenzeneCopperCyanideCadmiumCarbon TetrachlorideChloroformDichloromethaneDibromochloromethaneEthylene DibromideEthylbenzeneLeadMercuryNitrateNitriteSeleniumStyreneTetrachloroethyleneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
PFISTER, KENNETH
Phone
562-805-2015
Email
Kenneth.Pfister@Libertyutilities.com

Frequently asked questions about Liberty-Bellview Heights

Is Liberty-Bellview Heights tap water safe to drink?

EPA monitoring detected 4 contaminants in Liberty-Bellview Heights's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Liberty-Bellview Heights's water?

EPA monitoring detected Lead, Arsenic, Chromium, Fluoride. The full list with the level and data source for each is above.

How many people does Liberty-Bellview Heights serve?

Liberty-Bellview Heights reports serving 155 people in California, per its EPA record.

Has Liberty-Bellview Heights had any water quality violations?

The EPA has 3 violations on file for Liberty-Bellview Heights, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.