Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Unaddressed | 2024-10-17 |
| MCL | Health-based | Archived | 2023-07-01 → 2024-06-30 |
| MCL | Health-based | Archived | 2022-10-01 → 2023-09-30 |
| MCL | Health-based | Resolved | 1997-08-01 → 1997-08-31 |
| MCL | Health-based | Resolved | 1997-08-01 → 1997-08-31 |
| MCL | Health-based | Resolved | 1997-08-01 → 1997-08-31 |
| MCL | Health-based | Resolved | 1997-08-01 → 1997-08-31 |
| MCL | Health-based | Resolved | 1996-10-01 → 1996-10-31 |
| MCL | Health-based | Resolved | 1996-10-01 → 1996-10-31 |
| MCL | Health-based | Resolved | 1996-10-01 → 1996-10-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 5200 µg/L 52% of the EPA limit 10000 µg/L | 54/56 | SYR4 | 2012–2019 |
| Arsenic | 11 µg/L 110% of the EPA limit, in the worst sample — 10 µg/L | 13/16 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2024 |
| Bromoform | 26 µg/L No EPA limit set | 4/7 | SYR4 | 2015–2018 |
| Dibromoacetic Acid | 6.2 µg/L No EPA limit set | 4/7 | SYR4 | 2015–2018 |
| TTHM | 68 µg/L 85% of the EPA limit 80 µg/L | 4/7 | SYR4 | 2015–2018 |
| Total Haloacetic Acids (HAA5) | 7.4 µg/L 12% of the EPA limit 60 µg/L | 4/7 | SYR4 | 2015–2018 |
| Barium | 250 µg/L 13% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2013–2019 |
| Dibromochloromethane | 24 µg/L No EPA limit set | 3/7 | SYR4 | 2015–2018 |
| Fluoride | 390 µg/L 9.8% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2013–2019 |
| Bromodichloromethane | 14 µg/L No EPA limit set | 2/7 | SYR4 | 2015–2018 |
| Combined Uranium | 4.321 µg/L 14% of the EPA limit 30 µg/L | 2/2 | SYR4 | 2016 |
| Chloroform | 4.4 µg/L No EPA limit set | 1/7 | SYR4 | 2015–2018 |
| Chromium | 8 µg/L 8% of the EPA limit 100 µg/L | 1/3 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.2 µg/L No EPA limit set | 1/7 | SYR4 | 2015–2018 |
| Nitrite | 0.0600 µg/L 0% of the EPA limit 1000 µg/L | 1/5 | SYR4 | 2013–2019 |
46 contaminants tested, none detected
Utility contact
Frequently asked questions about Rancho San Joaquin Mwc
Is Rancho San Joaquin Mwc tap water safe to drink?
EPA monitoring detected 16 contaminants in Rancho San Joaquin Mwc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Rancho San Joaquin Mwc's water?
EPA monitoring detected Nitrate, Arsenic, Lead, Bromoform, Dibromoacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Rancho San Joaquin Mwc serve?
Rancho San Joaquin Mwc reports serving 914 people in California, per its EPA record.
Has Rancho San Joaquin Mwc had any water quality violations?
The EPA has 43 violations on file for Rancho San Joaquin Mwc, of which 16 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.