Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Resolved | 2020-01-01 → 2020-01-31 |
| MON | Monitoring | Resolved | 2020-01-01 → 2020-01-31 |
| MR | Monitoring | Resolved | 2020-01-01 |
| MR | Monitoring | Resolved | 2020-01-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 14.4 µg/L No EPA limit set | 89/89 | SYR4 | 2013–2019 |
| Chloroform | 24.6 µg/L No EPA limit set | 89/89 | SYR4 | 2013–2019 |
| Dibromochloromethane | 12.5 µg/L No EPA limit set | 89/89 | SYR4 | 2013–2019 |
| TTHM | 48.5 µg/L 61% of the EPA limit 80 µg/L | 89/89 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 11.7 µg/L No EPA limit set | 82/90 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 114 µg/L 190% of the EPA limit, in the worst sample — 60 µg/L | 82/90 | SYR4 | 2013–2019 |
| Bromoform | 11.2 µg/L No EPA limit set | 70/89 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 10.2 µg/L No EPA limit set | 58/90 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 5.8 µg/L No EPA limit set | 53/90 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 28/28 | LCR | 2024 |
| Fluoride | 570 µg/L 14% of the EPA limit 4000 µg/L | 12/12 | SYR4 | 2012–2018 |
| Combined Uranium | 6.4815 µg/L 22% of the EPA limit 30 µg/L | 10/12 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 107 µg/L No EPA limit set | 9/90 | SYR4 | 2013–2019 |
| Arsenic | 2.4 µg/L 24% of the EPA limit 10 µg/L | 4/31 | SYR4 | 2012–2019 |
| Lithium | 35.4811 µg/L No EPA limit set | 3/10 | UCMR-5 | 2025 |
| Combined Radium (-226 And -228) | 0.3650 pCi/L 7.3% of the EPA limit 5 pCi/L | 2/2 | SYR4 | 2012 |
93 contaminants tested, none detected
Utility contact
Frequently asked questions about City of Seal Beach
Is City of Seal Beach tap water safe to drink?
EPA monitoring detected 16 contaminants in City of Seal Beach's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Seal Beach's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does City of Seal Beach serve?
City of Seal Beach reports serving 24,937 people in California, per its EPA record.
Has City of Seal Beach had any water quality violations?
The EPA has 4 violations on file for City of Seal Beach, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.