Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1994-06-01 → 1994-06-30 |
| MCL | Health-based | Resolved | 1994-06-01 → 1994-06-30 |
| MCL | Health-based | Resolved | 1992-09-01 → 1992-09-30 |
| MCL | Health-based | Resolved | 1992-09-01 → 1992-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 15820 µg/L 158% of the EPA limit, in the worst sample — 10000 µg/L | 890/892 | SYR4 | 2012–2019 |
| Tetrachloroethylene | 5.6 µg/L 112% of the EPA limit, in the worst sample — 5 µg/L | 159/395 | SYR4 | 2012–2019 |
| Trichloroethylene | 2.4 µg/L 48% of the EPA limit 5 µg/L | 143/395 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 1000000 µg/L 10000% of the EPA limit, in the worst sample — 10000 µg/L | 140/140 | SYR4 | 2013–2019 |
| TTHM | 83 µg/L 104% of the EPA limit, in the worst sample — 80 µg/L | 72/282 | SYR4 | 2012–2019 |
| Dibromochloromethane | 36 µg/L No EPA limit set | 71/290 | SYR4 | 2012–2019 |
| Bromoform | 17 µg/L No EPA limit set | 69/290 | SYR4 | 2012–2019 |
| Bromodichloromethane | 30 µg/L No EPA limit set | 67/290 | SYR4 | 2012–2019 |
| Chloroform | 37 µg/L No EPA limit set | 65/290 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 20 µg/L No EPA limit set | 64/64 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 34 µg/L 57% of the EPA limit 60 µg/L | 64/64 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 8.6 µg/L No EPA limit set | 62/64 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 10 µg/L No EPA limit set | 60/64 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 37/37 | LCR | 2022 |
| Fluoride | 370 µg/L 9.3% of the EPA limit 4000 µg/L | 8/8 | SYR4 | 2014–2017 |
| Barium | 180 µg/L 9% of the EPA limit 2000 µg/L | 6/8 | SYR4 | 2014–2017 |
| Monobromoacetic Acid | 1.8 µg/L No EPA limit set | 6/64 | SYR4 | 2012–2019 |
| Combined Uranium | 13.261 µg/L 44% of the EPA limit 30 µg/L | 4/4 | SYR4 | 2014–2017 |
| Lithium | 65.7 µg/L No EPA limit set | 4/4 | UCMR-5 | 2024 |
| Monochloroacetic Acid | 2.1 µg/L No EPA limit set | 2/64 | SYR4 | 2012–2019 |
| Mercury | 1.4 µg/L 70% of the EPA limit 2 µg/L | 1/8 | SYR4 | 2014–2017 |
59 contaminants tested, none detected
Utility contact
Frequently asked questions about Valley Water Co.
Is Valley Water Co. tap water safe to drink?
EPA monitoring detected 21 contaminants in Valley Water Co.'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Valley Water Co.'s water?
EPA monitoring detected Nitrate, Tetrachloroethylene, Trichloroethylene, Nitrate-Nitrite, TTHM, and others. The full list with the level and data source for each is above.
How many people does Valley Water Co. serve?
Valley Water Co. reports serving 10,070 people in California, per its EPA record.
Has Valley Water Co. had any water quality violations?
The EPA has 4 violations on file for Valley Water Co., of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.