Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1998-09-01 → 1998-09-30 |
| MCL | Health-based | Resolved | 1998-09-01 → 1998-09-30 |
| MCL | Health-based | Resolved | 1998-08-01 → 1998-08-31 |
| MCL | Health-based | Resolved | 1998-08-01 → 1998-08-31 |
| MCL | Health-based | Resolved | 1998-04-01 → 1998-04-30 |
| MCL | Health-based | Resolved | 1998-04-01 → 1998-04-30 |
| MR | Monitoring | Resolved | 2019-01-01 → 2019-12-31 |
| MR | Monitoring | Resolved | 2019-01-01 → 2019-12-31 |
| MR | Monitoring | Resolved | 2019-01-01 → 2019-12-31 |
| MR | Monitoring | Resolved | 2019-01-01 → 2019-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 13000 µg/L 130% of the EPA limit, at the 95th percentile of samples — 10000 µg/L
worst single sample: 16000 µg/L | 408/408 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Barium | 87.4 µg/L 4.4% of the EPA limit 2000 µg/L
worst single sample: 90 µg/L | 5/5 | SYR4 | 2013–2019 |
| Fluoride | 278 µg/L 7% of the EPA limit 4000 µg/L
worst single sample: 280 µg/L | 5/5 | SYR4 | 2013–2019 |
| Selenium | 23.6 µg/L 47% of the EPA limit 50 µg/L
worst single sample: 27 µg/L | 5/5 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 4.82 µg/L 8% of the EPA limit 60 µg/L
worst single sample: 5.3 µg/L | 4/6 | SYR4 | 2014–2019 |
| Bromoform | 5.48 µg/L No EPA limit set
worst single sample: 5.5 µg/L | 3/6 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 1.58 µg/L No EPA limit set
worst single sample: 1.6 µg/L | 3/6 | SYR4 | 2014–2019 |
| TTHM | 5.99 µg/L 7.5% of the EPA limit 80 µg/L
worst single sample: 6 µg/L | 3/6 | SYR4 | 2014–2019 |
| Dibromochloromethane | 0.6855 µg/L No EPA limit set
worst single sample: 0.6900 µg/L | 2/6 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 3.81 µg/L No EPA limit set
worst single sample: 3.9 µg/L | 2/6 | SYR4 | 2014–2019 |
| Arsenic | 2.1 µg/L 21% of the EPA limit 10 µg/L | 1/5 | SYR4 | 2013–2019 |
39 contaminants tested, none detected
Utility contact
Frequently asked questions about Chanac Creek Mutual Water Company
Is Chanac Creek Mutual Water Company tap water safe to drink?
EPA monitoring detected 12 contaminants in Chanac Creek Mutual Water Company's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Chanac Creek Mutual Water Company's water?
EPA monitoring detected Nitrate, Lead, Barium, Fluoride, Selenium, and others. The full list with the level and data source for each is above.
How many people does Chanac Creek Mutual Water Company serve?
Chanac Creek Mutual Water Company reports serving 240 people in California, per its EPA record.
Has Chanac Creek Mutual Water Company had any water quality violations?
The EPA has 19 violations on file for Chanac Creek Mutual Water Company, of which 6 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.