Tap WaterIndex

Tap water quality report

Acme Water - Blue Hills

EPA monitoring tested this supplier for 80 contaminants and detected 11. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

80
contaminants tested
11
detected
138
people served
38
health-based violations
Water source
Ground water
Ownership
Private
Counties served
Yavapai

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

38
health-based violations
112
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2025-04-01 → 2025-06-30
MCL Health-based Resolved 2025-04-01 → 2025-06-30
MCL Health-based Resolved 2025-04-01 → 2025-06-30
MCL Health-based Resolved 2025-04-01 → 2025-06-30
MCL Health-based Resolved 2025-04-01 → 2025-06-30
MCL Health-based Resolved 2012-01-01 → 2012-03-31
MCL Health-based Resolved 2011-10-01 → 2011-12-31
MCL Health-based Resolved 2011-07-01 → 2011-09-30
MCL Health-based Resolved 2011-07-01 → 2011-09-30
MCL Health-based Resolved 2011-07-01 → 2011-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Arsenic
10.57 µg/L 106%
of the EPA limit, at the 95th percentile of samples — 10 µg/L
worst single sample: 11 µg/L
32/35 SYR4 2012–2019
Copper
97.5 µg/L 7.5%
of the EPA limit 1300 µg/L
worst single sample: 120 µg/L
16/35 SYR4 2013–2018
Nitrate
9200 µg/L 92%
of the EPA limit 10000 µg/L
 16/16 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
 9/9 LCR 2024
Lead
3.8 µg/L 25%
of the EPA limit 15 µg/L
worst single sample: 4 µg/L
6/35 SYR4 2013–2018
Tetrachloroethylene
1.52 µg/L 30%
of the EPA limit 5 µg/L
worst single sample: 1.6 µg/L
5/5 SYR4 2013–2019
Barium
65.95 µg/L 3.3%
of the EPA limit 2000 µg/L
worst single sample: 66 µg/L
2/2 SYR4 2013–2018
Chromium
2.285 µg/L 2.3%
of the EPA limit 100 µg/L
worst single sample: 2.3 µg/L
2/2 SYR4 2013–2018
Fluoride
727.5 µg/L 18%
of the EPA limit 4000 µg/L
worst single sample: 730 µg/L
2/2 SYR4 2013–2018
TTHM
2.81 µg/L 3.5%
of the EPA limit 80 µg/L
worst single sample: 2.9 µg/L
2/3 SYR4 2013–2019
Nitrate-Nitrite
6900 µg/L 69%
of the EPA limit 10000 µg/L
 1/1 SYR4 2013
69 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,3,7,8-TCDD2,4,5-TP2,4-DAntimony, TotalAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromodichloromethaneBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChloroformCombined Radium (-226 And -228)DichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDibromochloromethaneDichloroacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneThallium, TotalTolueneTotal Haloacetic Acids (HAA5)ToxapheneTrichloroacetic AcidTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Frequently asked questions about Acme Water - Blue Hills

Is Acme Water - Blue Hills tap water safe to drink?

EPA monitoring detected 11 contaminants in Acme Water - Blue Hills's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Acme Water - Blue Hills's water?

EPA monitoring detected Arsenic, Copper, Nitrate, Lead, Lead, and others. The full list with the level and data source for each is above.

How many people does Acme Water - Blue Hills serve?

Acme Water - Blue Hills reports serving 138 people, per its EPA record.

Has Acme Water - Blue Hills had any water quality violations?

The EPA has 112 violations on file for Acme Water - Blue Hills, of which 38 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.