Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2017-10-01 → 2017-12-31 |
| MCL | Health-based | Resolved | 2017-10-01 → 2017-12-31 |
| MCL | Health-based | Resolved | 2017-10-01 → 2017-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 990 µg/L 25% of the EPA limit 4000 µg/L | 105/105 | SYR4 | 2012–2019 |
| Bromodichloromethane | 14.2 µg/L No EPA limit set | 61/61 | SYR4 | 2012–2019 |
| Chloroform | 141 µg/L No EPA limit set | 61/61 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 55.4 µg/L No EPA limit set | 56/56 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 96.7 µg/L 161% of the EPA limit, in the worst sample — 60 µg/L | 56/56 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 37.2 µg/L No EPA limit set | 56/56 | SYR4 | 2012–2019 |
| TTHM | 157 µg/L 196% of the EPA limit, in the worst sample — 80 µg/L | 54/54 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 4.5 µg/L No EPA limit set | 29/56 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.6 µg/L No EPA limit set | 27/67 | SYR4 | 2012–2019 |
| Copper | 950 µg/L 73% of the EPA limit 1300 µg/L | 17/22 | SYR4 | 2014–2017 |
| Lead | 0.0040 mg/L 27% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2025 |
| Nitrate-Nitrite | 1630 µg/L 16% of the EPA limit 10000 µg/L | 10/12 | SYR4 | 2012–2019 |
| Lead | 27 µg/L 180% of the EPA limit, in the worst sample — 15 µg/L | 7/31 | SYR4 | 2012–2019 |
| Nitrate | 1060 µg/L 11% of the EPA limit 10000 µg/L | 6/14 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.1 µg/L No EPA limit set | 4/56 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 3.5 pCi/L No EPA limit set | 1/9 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.1 µg/L No EPA limit set | 1/56 | SYR4 | 2012–2019 |
92 contaminants tested, none detected
Utility contact
Frequently asked questions about Atkins Water
Is Atkins Water tap water safe to drink?
EPA monitoring detected 17 contaminants in Atkins Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Atkins Water's water?
EPA monitoring detected Fluoride, Bromodichloromethane, Chloroform, Dichloroacetic Acid, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Atkins Water serve?
Atkins Water reports serving 4,439 people in Arkansas, per its EPA record.
Has Atkins Water had any water quality violations?
The EPA has 80 violations on file for Atkins Water, of which 76 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.