Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| RPT | Monitoring | Resolved | 2020-04-11 |
| RPT | Monitoring | Resolved | 2020-04-11 |
| MR | Monitoring | Resolved | 2012-03-01 → 2012-03-31 |
| MR | Monitoring | Resolved | 2012-03-01 → 2012-03-31 |
| MR | Monitoring | Resolved | 2012-03-01 → 2012-03-31 |
| MR | Monitoring | Resolved | 2012-03-01 → 2012-03-31 |
| MR | Monitoring | Resolved | 1996-07-01 → 1996-12-31 |
| MR | Monitoring | Resolved | 1996-07-01 → 1996-12-31 |
| MR | Monitoring | Resolved | 1996-07-01 → 1996-12-31 |
| MR | Monitoring | Resolved | 1996-07-01 → 1996-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 720 µg/L 7.2% of the EPA limit 10000 µg/L | 48/48 | SYR4 | 2012–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 22/22 | LCR | 2023 |
| TTHM | 25.5 µg/L 32% of the EPA limit 80 µg/L
worst single sample: 27.1 µg/L | 11/28 | SYR4 | 2012–2019 |
| Barium | 15.2 µg/L 0.8% of the EPA limit 2000 µg/L
worst single sample: 16 µg/L | 9/9 | SYR4 | 2012–2018 |
| Nitrate-Nitrite | 680 µg/L 6.8% of the EPA limit 10000 µg/L
worst single sample: 720 µg/L | 9/9 | SYR4 | 2012–2018 |
| Copper | 33.6 µg/L 2.6% of the EPA limit 1300 µg/L
worst single sample: 35 µg/L | 8/9 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 9 µg/L 15% of the EPA limit 60 µg/L
worst single sample: 10 µg/L | 6/28 | SYR4 | 2012–2019 |
| Chloroform | 1.18 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 2/17 | SYR4 | 2012–2019 |
| Fluoride | 1113 µg/L 28% of the EPA limit 4000 µg/L
worst single sample: 1160 µg/L | 2/9 | SYR4 | 2012–2018 |
| Selenium | 1.95 µg/L 3.9% of the EPA limit 50 µg/L
worst single sample: 2 µg/L | 2/9 | SYR4 | 2012–2018 |
| Bromodichloromethane | 0.6000 µg/L No EPA limit set | 1/17 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Phthalate | 0.7900 µg/L 13% of the EPA limit 6 µg/L | 1/23 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.9 µg/L No EPA limit set | 1/17 | SYR4 | 2012–2019 |
| Pentachlorophenol | 0.2000 µg/L 20% of the EPA limit 1 µg/L | 1/23 | SYR4 | 2012–2019 |
90 contaminants tested, none detected
Utility contact
Frequently asked questions about Wattsville Water Authority
Is Wattsville Water Authority tap water safe to drink?
EPA monitoring detected 14 contaminants in Wattsville Water Authority's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Wattsville Water Authority's water?
EPA monitoring detected Nitrate, Lead, TTHM, Barium, Nitrate-Nitrite, and others. The full list with the level and data source for each is above.
How many people does Wattsville Water Authority serve?
Wattsville Water Authority reports serving 5,097 people in Alabama, per its EPA record.
Has Wattsville Water Authority had any water quality violations?
The EPA has 20 violations on file for Wattsville Water Authority, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.