Tap WaterIndex

← Alaska

Tap water quality report

Alpine Woods Water

EPA monitoring tested this supplier for 28 contaminants and detected 4. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

28
contaminants tested
4
detected
200
people served
0
health-based violations
Alaska rankingsLead in AlaskaPFAS in Alaska
Water source
Ground water
Ownership
Private
Counties served
Anchorage Municipality

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
93
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Resolved 2014-01-01 → 2016-12-31
MR Monitoring Resolved 2014-01-01 → 2016-12-31
MR Monitoring Resolved 2014-01-01 → 2016-12-31
MR Monitoring Resolved 2014-01-01 → 2016-12-31
MR Monitoring Resolved 2014-01-01 → 2016-12-31
MR Monitoring Resolved 2014-01-01 → 2016-12-31
MR Monitoring Resolved 2014-01-01 → 2016-12-31
MR Monitoring Resolved 2014-01-01 → 2016-12-31
MR Monitoring Resolved 2014-01-01 → 2016-12-31
MR Monitoring Resolved 2014-01-01 → 2016-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
1600 µg/L 123%
of the EPA limit, in the worst sample — 1300 µg/L
 26/26 SYR4 2014–2019
Lead
0.00070 mg/L 4.7%
of the EPA limit 0.0150 mg/L
 19/19 LCR 2023
Lead
8.77 µg/L 58%
of the EPA limit 15 µg/L
 10/26 SYR4 2014–2019
Arsenic
2.3 µg/L 23%
of the EPA limit 10 µg/L
 1/1 SYR4 2018
24 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-DichloropropaneBenzeneChlorobenzeneCarbon TetrachlorideCombined Radium (-226 And -228)DichloromethaneEthylbenzeneNitrateNitrate-NitriteStyreneTetrachloroethyleneTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
WOODS, TOM
Phone
907-345-8908
Email
tomw@gci.net

Frequently asked questions about Alpine Woods Water

Is Alpine Woods Water tap water safe to drink?

EPA monitoring detected 4 contaminants in Alpine Woods Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Alpine Woods Water's water?

EPA monitoring detected Copper, Lead, Lead, Arsenic. The full list with the level and data source for each is above.

How many people does Alpine Woods Water serve?

Alpine Woods Water reports serving 200 people in Alaska, per its EPA record.

Has Alpine Woods Water had any water quality violations?

The EPA has 93 violations on file for Alpine Woods Water, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.