Tap WaterIndex

← Alaska

Tap water quality report

Swiss Aire S/D

EPA monitoring tested this supplier for 39 contaminants and detected 5. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

39
contaminants tested
5
detected
48
people served
0
health-based violations
Alaska rankingsLead in AlaskaPFAS in Alaska
Water source
Ground water
Ownership
Private
Counties served
Anchorage Municipality

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
61
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Resolved 2024-01-01 → 2024-12-31
MON Monitoring Resolved 2021-01-01 → 2021-03-31
MR Monitoring Resolved 2019-01-01 → 2019-12-31
MR Monitoring Resolved 2017-01-01 → 2017-12-31
MR Monitoring Resolved 2010-01-01
MR Monitoring Resolved 2010-01-01 → 2010-03-31
MR Monitoring Resolved 2010-01-01 → 2010-03-31
MR Monitoring Resolved 2010-01-01 → 2010-03-31
MR Monitoring Resolved 2010-01-01 → 2010-03-31
MR Monitoring Resolved 2010-01-01 → 2010-03-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Lead
0.0057 mg/L 38%
of the EPA limit 0.0150 mg/L
 17/17 LCR 2025
Copper
665 µg/L 51%
of the EPA limit 1300 µg/L
 15/15 SYR4 2013–2019
Lead
12.1 µg/L 81%
of the EPA limit 15 µg/L
 5/15 SYR4 2013–2019
Arsenic
5.79 µg/L 58%
of the EPA limit 10 µg/L
 2/2 SYR4 2013–2018
Barium
6.52 µg/L 0.3%
of the EPA limit 2000 µg/L
 1/1 SYR4 2019
34 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-DichloropropaneAntimony, TotalAsbestosBenzeneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbon TetrachlorideChromiumCombined Radium (-226 And -228)DichloromethaneEthylbenzeneFluorideMercuryNitrateNitrate-NitriteSeleniumStyreneTetrachloroethyleneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
O'BRIEN, DAVID
Email
IreneAndDavid@ak.net

Frequently asked questions about Swiss Aire S/D

Is Swiss Aire S/D tap water safe to drink?

EPA monitoring detected 5 contaminants in Swiss Aire S/D's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Swiss Aire S/D's water?

EPA monitoring detected Lead, Copper, Lead, Arsenic, Barium. The full list with the level and data source for each is above.

How many people does Swiss Aire S/D serve?

Swiss Aire S/D reports serving 48 people in Alaska, per its EPA record.

Has Swiss Aire S/D had any water quality violations?

The EPA has 61 violations on file for Swiss Aire S/D, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.