What was found in Laurens's water
The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.
| Contaminant | Level vs EPA limit | Suppliers | Source |
|---|---|---|---|
| Copper | 3220 µg/L 248% of the EPA limit, in the worst sample — 1300 µg/L | 3/3 | SYR4 |
| Nitrate | 1600 µg/L 16% of the EPA limit 10000 µg/L | 2/3 | SYR4 |
| Nitrate-Nitrite | 1500 µg/L 15% of the EPA limit 10000 µg/L | 1/3 | SYR4 |
| Fluoride | 760 µg/L 19% of the EPA limit 4000 µg/L | 2/3 | SYR4 |
| TTHM | 123.4 µg/L 154% of the EPA limit, in the worst sample — 80 µg/L | 2/3 | SYR4 |
| Total Haloacetic Acids (HAA5) | 113 µg/L 188% of the EPA limit, in the worst sample — 60 µg/L | 2/3 | SYR4 |
| Chloroform | 108.9 µg/L No EPA limit set | 2/3 | SYR4 |
| Dichloroacetic Acid | 55.2 µg/L No EPA limit set | 2/3 | SYR4 |
| Trichloroacetic Acid | 54.3 µg/L No EPA limit set | 2/3 | SYR4 |
| Lead | 31 µg/L 207% of the EPA limit, in the worst sample — 15 µg/L | 3/3 | SYR4 |
| Bromodichloromethane | 27.2 µg/L No EPA limit set | 2/3 | SYR4 |
| Bromoform | 24 µg/L No EPA limit set | 1/3 | SYR4 |
| Dibromochloromethane | 12.6 µg/L No EPA limit set | 2/3 | SYR4 |
| Monobromoacetic Acid | 5.39 µg/L No EPA limit set | 2/3 | SYR4 |
| Monochloroacetic Acid | 4.7 µg/L No EPA limit set | 2/3 | SYR4 |
| Dibromoacetic Acid | 2.6 µg/L No EPA limit set | 2/3 | SYR4 |
| Gross Alpha, Excl. Radon And U | 1.8 pCi/L 12% of the EPA limit 15 pCi/L | 1/3 | SYR4 |
| Hfpo-Da | 0.0958 µg/L No EPA limit set | 1/3 | UCMR-5 |
| Pfpea | 0.0237 µg/L No EPA limit set | 2/3 | UCMR-5 |
| Pfhxa | 0.0193 µg/L No EPA limit set | 2/3 | UCMR-5 |
| PFBS | 0.0143 µg/L No EPA limit set | 2/3 | UCMR-5 |
| PFOS | 0.0087 µg/L No EPA limit set | 1/3 | UCMR-5 |
| PFOA | 0.0075 µg/L No EPA limit set | 1/3 | UCMR-5 |
| Pfba | 0.0072 µg/L No EPA limit set | 1/3 | UCMR-5 |
| Pfhpa | 0.0034 µg/L No EPA limit set | 1/3 | UCMR-5 |
| PFHXS | 0.0031 µg/L No EPA limit set | 1/3 | UCMR-5 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 3/3 | LCR |
Water suppliers serving Laurens
| Supplier | Population served |
|---|---|
| LAURENS COUNTY W&S COMM (SC3020001) | 44,866 |
| LAURENS CPW (SC3010001) | 13,902 |
| RANCH ROAD WATER (SC3050008) | 40 |
Frequently asked questions about Laurens tap water
Is Laurens tap water safe to drink?
EPA testing detected 27 contaminants in the water serving Laurens. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.
How many water suppliers serve Laurens?
3 public water suppliers report drinking-water monitoring for Laurens, South Carolina to the EPA. Each is listed above with its population served.
What contaminants are in Laurens's water?
The contaminants EPA monitoring detected in Laurens include Copper, Nitrate, Nitrate-Nitrite, Fluoride, TTHM. The full list, with the highest level found and the data source, is in the table above.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.