What was found in Saint Marys's water
The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.
| Contaminant | Level vs EPA limit | Suppliers | Source |
|---|---|---|---|
| Nitrate | 560 µg/L 5.6% of the EPA limit 10000 µg/L | 1/1 | SYR4 |
| Fluoride | 535 µg/L 13% of the EPA limit 4000 µg/L | 1/1 | SYR4 |
| Copper | 149 µg/L 11% of the EPA limit 1300 µg/L | 1/1 | SYR4 |
| Total Haloacetic Acids (HAA5) | 73.3 µg/L 122% of the EPA limit, in the worst sample — 60 µg/L | 1/1 | SYR4 |
| TTHM | 72 µg/L 90% of the EPA limit 80 µg/L | 1/1 | SYR4 |
| Bromodichloromethane | 60 µg/L No EPA limit set | 1/1 | SYR4 |
| Chloroform | 60 µg/L No EPA limit set | 1/1 | SYR4 |
| Lead | 59 µg/L 393% of the EPA limit, in the worst sample — 15 µg/L | 1/1 | SYR4 |
| Barium | 42.4 µg/L 2.1% of the EPA limit 2000 µg/L | 1/1 | SYR4 |
| Dichloroacetic Acid | 39.5 µg/L No EPA limit set | 1/1 | SYR4 |
| Trichloroacetic Acid | 38 µg/L No EPA limit set | 1/1 | SYR4 |
| Dibromochloromethane | 2 µg/L No EPA limit set | 1/1 | SYR4 |
| Monochloroacetic Acid | 1.2 µg/L No EPA limit set | 1/1 | SYR4 |
| Bromoform | 0.6080 µg/L No EPA limit set | 1/1 | SYR4 |
| Lead | 0.0033 mg/L 22% of the EPA limit 0.0150 mg/L | 1/1 | LCR |
Water suppliers serving Saint Marys
| Supplier | Population served |
|---|---|
| ST MARYS AREA WATER AUTH | 19,588 |
Frequently asked questions about Saint Marys tap water
Is Saint Marys tap water safe to drink?
EPA testing detected 15 contaminants in the water serving Saint Marys. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.
How many water suppliers serve Saint Marys?
1 public water supplier report drinking-water monitoring for Saint Marys, Pennsylvania to the EPA. Each is listed above with its population served.
What contaminants are in Saint Marys's water?
The contaminants EPA monitoring detected in Saint Marys include Nitrate, Fluoride, Copper, Total Haloacetic Acids (HAA5), TTHM. The full list, with the highest level found and the data source, is in the table above.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.