← Pennsylvania

Tap water quality report

Blairsville, PA

EPA monitoring detected 27 contaminants across the 2 water suppliers serving Blairsville. A detection doesn't automatically mean the water is unsafe — see the highest level found for each below, with its EPA source and period.

2
water suppliers
16,090
people served
27
contaminants found

What was found in Blairsville's water

The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Nitrate
9300 µg/L 93%
of the EPA limit 10000 µg/L
2/2 SYR4
Barium
1270 µg/L 64%
of the EPA limit 2000 µg/L
2/2 SYR4
Copper
223 µg/L 17%
of the EPA limit 1300 µg/L
2/2 SYR4
Total Haloacetic Acids (HAA5)
117 µg/L 195%
of the EPA limit, in the worst sample — 60 µg/L
2/2 SYR4
TTHM
97.9 µg/L 122%
of the EPA limit, in the worst sample — 80 µg/L
2/2 SYR4
Chloroform
89.3 µg/L
No EPA limit set
2/2 SYR4
Trichloroacetic Acid
58.8 µg/L
No EPA limit set
2/2 SYR4
Dichloroacetic Acid
45.1 µg/L
No EPA limit set
2/2 SYR4
Bromodichloromethane
8.97 µg/L
No EPA limit set
2/2 SYR4
Cyanide
7 µg/L 3.5%
of the EPA limit 200 µg/L
1/2 SYR4
Lead
5.5 µg/L 37%
of the EPA limit 15 µg/L
1/2 SYR4
Dibromochloromethane
5.03 µg/L
No EPA limit set
2/2 SYR4
Monochloroacetic Acid
2.7 µg/L
No EPA limit set
1/2 SYR4
Bromoform
2.38 µg/L
No EPA limit set
1/2 SYR4
Dibromoacetic Acid
1.91 µg/L
No EPA limit set
2/2 SYR4
Antimony, Total
0.9000 µg/L 15%
of the EPA limit 6 µg/L
1/2 SYR4
Benzo(A)Pyrene
0.5600 µg/L 280%
of the EPA limit, in the worst sample — 0.2000 µg/L
1/2 SYR4
Mercury
0.2800 µg/L 14%
of the EPA limit 2 µg/L
1/2 SYR4
Arsenic
0.2260 µg/L 2.3%
of the EPA limit 10 µg/L
1/2 SYR4
Cadmium
0.2000 µg/L 4%
of the EPA limit 5 µg/L
1/2 SYR4
Lead
0.0170 mg/L 113%
above the EPA limit of 0.0150 mg/L
2/2 LCR
Pfba
0.0060 µg/L
No EPA limit set
1/2 UCMR-5
PFHXS
0.0055 µg/L
No EPA limit set
1/2 UCMR-5
PFOS
0.0045 µg/L
No EPA limit set
1/2 UCMR-5
PFOA
0.0043 µg/L
No EPA limit set
1/2 UCMR-5
Pfpea
0.0039 µg/L
No EPA limit set
1/2 UCMR-5
Pfhxa
0.0033 µg/L
No EPA limit set
1/2 UCMR-5
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Blairsville

SupplierPopulation served
HIGHRIDGE WATER AUTH 16,000
SUN DIAL VILLAGE MHP 90

Frequently asked questions about Blairsville tap water

Is Blairsville tap water safe to drink?

EPA testing detected 27 contaminants in the water serving Blairsville. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Blairsville?

2 public water suppliers report drinking-water monitoring for Blairsville, Pennsylvania to the EPA. Each is listed above with its population served.

What contaminants are in Blairsville's water?

The contaminants EPA monitoring detected in Blairsville include Nitrate, Barium, Copper, Total Haloacetic Acids (HAA5), TTHM. The full list, with the highest level found and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.