What was found in Ambridge's water
The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.
| Contaminant | Level vs EPA limit | Suppliers | Source |
|---|---|---|---|
| Nitrate | 650 µg/L 6.5% of the EPA limit 10000 µg/L | 1/1 | SYR4 |
| Copper | 610 µg/L 47% of the EPA limit 1300 µg/L | 1/1 | SYR4 |
| Fluoride | 124 µg/L 3.1% of the EPA limit 4000 µg/L | 1/1 | SYR4 |
| TTHM | 85.5 µg/L 107% of the EPA limit, in the worst sample — 80 µg/L | 1/1 | SYR4 |
| Total Haloacetic Acids (HAA5) | 84 µg/L 140% of the EPA limit, in the worst sample — 60 µg/L | 1/1 | SYR4 |
| Chloroform | 75.7 µg/L No EPA limit set | 1/1 | SYR4 |
| Trichloroacetic Acid | 44.3 µg/L No EPA limit set | 1/1 | SYR4 |
| Dichloroacetic Acid | 42 µg/L No EPA limit set | 1/1 | SYR4 |
| Lead | 36 µg/L 240% of the EPA limit, in the worst sample — 15 µg/L | 1/1 | SYR4 |
| Barium | 30 µg/L 1.5% of the EPA limit 2000 µg/L | 1/1 | SYR4 |
| Bromodichloromethane | 10.5 µg/L No EPA limit set | 1/1 | SYR4 |
| Cyanide | 6 µg/L 3% of the EPA limit 200 µg/L | 1/1 | SYR4 |
| Monochloroacetic Acid | 2.22 µg/L No EPA limit set | 1/1 | SYR4 |
| Dibromochloromethane | 1.67 µg/L No EPA limit set | 1/1 | SYR4 |
| Lead | 0.0093 mg/L 62% of the EPA limit 0.0150 mg/L | 1/1 | LCR |
Water suppliers serving Ambridge
| Supplier | Population served |
|---|---|
| AMBRIDGE WATER AUTH | 19,500 |
Frequently asked questions about Ambridge tap water
Is Ambridge tap water safe to drink?
EPA testing detected 15 contaminants in the water serving Ambridge. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.
How many water suppliers serve Ambridge?
1 public water supplier report drinking-water monitoring for Ambridge, Pennsylvania to the EPA. Each is listed above with its population served.
What contaminants are in Ambridge's water?
The contaminants EPA monitoring detected in Ambridge include Nitrate, Copper, Fluoride, TTHM, Total Haloacetic Acids (HAA5). The full list, with the highest level found and the data source, is in the table above.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.