← Ohio

Tap water quality report

Louisville, OH

EPA monitoring detected 23 contaminants across the 5 water suppliers serving Louisville. A detection doesn't automatically mean the water is unsafe — see the highest level found for each below, with its EPA source and period.

5
water suppliers
11,227
people served
23
contaminants found

What was found in Louisville's water

The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Fluoride
2180 µg/L 55%
of the EPA limit 4000 µg/L
4/5 SYR4
Copper
1910 µg/L 147%
of the EPA limit, in the worst sample — 1300 µg/L
5/5 SYR4
Nitrate
270 µg/L 2.7%
of the EPA limit 10000 µg/L
1/5 SYR4
Nitrate-Nitrite
270 µg/L 2.7%
of the EPA limit 10000 µg/L
1/5 SYR4
TTHM
148.1 µg/L 185%
of the EPA limit, in the worst sample — 80 µg/L
5/5 SYR4
Barium
138 µg/L 6.9%
of the EPA limit 2000 µg/L
4/5 SYR4
Chloroform
103 µg/L
No EPA limit set
5/5 SYR4
Total Haloacetic Acids (HAA5)
99.6 µg/L 166%
of the EPA limit, in the worst sample — 60 µg/L
5/5 SYR4
Dichloroacetic Acid
58.6 µg/L
No EPA limit set
5/5 SYR4
Bromodichloromethane
58.3 µg/L
No EPA limit set
5/5 SYR4
Dibromochloromethane
35.7 µg/L
No EPA limit set
5/5 SYR4
Trichloroacetic Acid
27.5 µg/L
No EPA limit set
5/5 SYR4
Chromium
26 µg/L 26%
of the EPA limit 100 µg/L
3/5 SYR4
Monochloroacetic Acid
22.4 µg/L
No EPA limit set
4/5 SYR4
Lead
22 µg/L 147%
of the EPA limit, in the worst sample — 15 µg/L
4/5 SYR4
Dibromoacetic Acid
18 µg/L
No EPA limit set
5/5 SYR4
Bromoform
16.9 µg/L
No EPA limit set
5/5 SYR4
Lithium
9 µg/L
No EPA limit set
1/5 UCMR-5
Monobromoacetic Acid
2.5 µg/L
No EPA limit set
3/5 SYR4
Selenium
1.52 µg/L 3%
of the EPA limit 50 µg/L
3/5 SYR4
P-Dichlorobenzene
0.7000 µg/L 0.9%
of the EPA limit 75 µg/L
1/5 SYR4
Pfpea
0.0030 µg/L
No EPA limit set
1/5 UCMR-5
Lead
0.0012 mg/L 8.3%
of the EPA limit 0.0150 mg/L
5/5 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Louisville

Frequently asked questions about Louisville tap water

Is Louisville tap water safe to drink?

EPA testing detected 23 contaminants in the water serving Louisville. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Louisville?

5 public water suppliers report drinking-water monitoring for Louisville, Ohio to the EPA. Each is listed above with its population served.

What contaminants are in Louisville's water?

The contaminants EPA monitoring detected in Louisville include Fluoride, Copper, Nitrate, Nitrate-Nitrite, TTHM. The full list, with the highest level found and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.