← North Carolina

Tap water quality report

White Lake, NC

EPA monitoring detected 25 contaminants across the 2 water suppliers serving White Lake. A detection doesn't automatically mean the water is unsafe — see the highest level found for each below, with its EPA source and period.

2
water suppliers
10,080
people served
25
contaminants found

What was found in White Lake's water

The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Fluoride
600 µg/L 15%
of the EPA limit 4000 µg/L
2/2 SYR4
Copper
443 µg/L 34%
of the EPA limit 1300 µg/L
2/2 SYR4
TTHM
110 µg/L 138%
of the EPA limit, in the worst sample — 80 µg/L
2/2 SYR4
Barium
107 µg/L 5.4%
of the EPA limit 2000 µg/L
1/2 SYR4
Dibromochloromethane
45 µg/L
No EPA limit set
2/2 SYR4
Bromoform
42 µg/L
No EPA limit set
2/2 SYR4
Total Haloacetic Acids (HAA5)
41.2 µg/L 69%
of the EPA limit 60 µg/L
2/2 SYR4
Chloroform
40.8 µg/L
No EPA limit set
2/2 SYR4
Lead
31 µg/L 207%
of the EPA limit, in the worst sample — 15 µg/L
2/2 SYR4
Bromodichloromethane
30 µg/L
No EPA limit set
2/2 SYR4
Trichloroacetic Acid
22.7 µg/L
No EPA limit set
2/2 SYR4
Dichloroacetic Acid
18.9 µg/L
No EPA limit set
2/2 SYR4
Dibromoacetic Acid
10.9 µg/L
No EPA limit set
2/2 SYR4
Lithium
9.25 µg/L
No EPA limit set
1/2 UCMR-5
Toluene
4.8 µg/L 0.5%
of the EPA limit 1000 µg/L
1/2 SYR4
Tetrachloroethylene
4.7 µg/L 94%
of the EPA limit 5 µg/L
1/2 SYR4
Monochloroacetic Acid
4 µg/L
No EPA limit set
1/2 SYR4
Xylenes, Total
2.8 µg/L 0%
of the EPA limit 10000 µg/L
1/2 SYR4
Vinyl Chloride
2.3 µg/L 115%
of the EPA limit, in the worst sample — 2 µg/L
1/2 SYR4
1,2-Dichloropropane
1 µg/L 20%
of the EPA limit 5 µg/L
1/2 SYR4
Combined Radium (-226 And -228)
1 pCi/L 20%
of the EPA limit 5 pCi/L
1/2 SYR4
1,1,1-Trichloroethane
0.7000 µg/L 0.4%
of the EPA limit 200 µg/L
1/2 SYR4
Ethylbenzene
0.7000 µg/L 0.1%
of the EPA limit 700 µg/L
1/2 SYR4
Hfpo-Da
0.0136 µg/L
No EPA limit set
1/2 UCMR-5
Lead
0.0060 mg/L 40%
of the EPA limit 0.0150 mg/L
2/2 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving White Lake

SupplierPopulation served
WHITE LAKE, TOWN OF 5,770
BLADEN CO WTR DIST-EAST BLADEN 4,310

Frequently asked questions about White Lake tap water

Is White Lake tap water safe to drink?

EPA testing detected 25 contaminants in the water serving White Lake. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve White Lake?

2 public water suppliers report drinking-water monitoring for White Lake, North Carolina to the EPA. Each is listed above with its population served.

What contaminants are in White Lake's water?

The contaminants EPA monitoring detected in White Lake include Fluoride, Copper, TTHM, Barium, Dibromochloromethane. The full list, with the highest level found and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.