Tap WaterIndex

← Missouri

Tap water quality report

Maysville, MO

EPA monitoring detected 22 contaminants across the 1 water supplier serving Maysville. A detection doesn't automatically mean the water is unsafe — see the highest level found for each below, with its EPA source and period.

1
water supplier
1,096
people served
22
contaminants found
Missouri rankings Lead in Missouri PFAS in Missouri

What was found in Maysville's water

The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Copper
1560 µg/L 120%
of the EPA limit, in the worst sample — 1300 µg/L
 1/1 SYR4
Chlorite
1120 µg/L 112%
of the EPA limit, in the worst sample — 1000 µg/L
 1/1 SYR4
Nitrate-Nitrite
830 µg/L 8.3%
of the EPA limit 10000 µg/L
 1/1 SYR4
Fluoride
280 µg/L 7%
of the EPA limit 4000 µg/L
 1/1 SYR4
TTHM
148 µg/L 185%
of the EPA limit, in the worst sample — 80 µg/L
 1/1 SYR4
Chloroform
114 µg/L
No EPA limit set
 1/1 SYR4
Barium
107 µg/L 5.4%
of the EPA limit 2000 µg/L
 1/1 SYR4
Total Haloacetic Acids (HAA5)
71 µg/L 118%
of the EPA limit, in the worst sample — 60 µg/L
 1/1 SYR4
Dichloroacetic Acid
49.7 µg/L
No EPA limit set
 1/1 SYR4
Trichloroacetic Acid
36.8 µg/L
No EPA limit set
 1/1 SYR4
Bromodichloromethane
29.1 µg/L
No EPA limit set
 1/1 SYR4
Monobromoacetic Acid
15.7 µg/L
No EPA limit set
 1/1 SYR4
Dibromochloromethane
9.78 µg/L
No EPA limit set
 1/1 SYR4
Lead
5.61 µg/L 37%
of the EPA limit 15 µg/L
 1/1 SYR4
Atrazine
3.66 µg/L 122%
of the EPA limit, in the worst sample — 3 µg/L
 1/1 SYR4
Dibromoacetic Acid
3.26 µg/L
No EPA limit set
 1/1 SYR4
Chromium
2.47 µg/L 2.5%
of the EPA limit 100 µg/L
 1/1 SYR4
Bromoform
1.65 µg/L
No EPA limit set
 1/1 SYR4
Arsenic
1.29 µg/L 13%
of the EPA limit 10 µg/L
 1/1 SYR4
Lasso
0.9400 µg/L 47%
of the EPA limit 2 µg/L
 1/1 SYR4
Carbon Tetrachloride
0.6800 µg/L 14%
of the EPA limit 5 µg/L
 1/1 SYR4
Lead
0.0044 mg/L 29%
of the EPA limit 0.0150 mg/L
 1/1 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Maysville

SupplierPopulation served
MAYSVILLE PWS 1,096

Frequently asked questions about Maysville tap water

Is Maysville tap water safe to drink?

EPA testing detected 22 contaminants in the water serving Maysville. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Maysville?

1 public water supplier report drinking-water monitoring for Maysville, Missouri to the EPA. Each is listed above with its population served.

What contaminants are in Maysville's water?

The contaminants EPA monitoring detected in Maysville include Copper, Chlorite, Nitrate-Nitrite, Fluoride, TTHM. The full list, with the highest level found and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.