← Minnesota

Tap water quality report

Sauk Rapids, MN

EPA monitoring detected 29 contaminants across the 5 water suppliers serving Sauk Rapids. A detection doesn't automatically mean the water is unsafe — see the highest level found for each below, with its EPA source and period.

5
water suppliers
14,223
people served
29
contaminants found

What was found in Sauk Rapids's water

The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Nitrate-Nitrite
5400 µg/L 54%
of the EPA limit 10000 µg/L
3/5 SYR4
Fluoride
1300 µg/L 33%
of the EPA limit 4000 µg/L
3/5 SYR4
Copper
1250 µg/L 96%
of the EPA limit 1300 µg/L
5/5 SYR4
Barium
170 µg/L 8.5%
of the EPA limit 2000 µg/L
5/5 SYR4
Cyanide
50 µg/L 25%
of the EPA limit 200 µg/L
1/5 SYR4
Chloroform
24 µg/L
No EPA limit set
2/5 SYR4
Dichloroacetic Acid
15 µg/L
No EPA limit set
2/5 SYR4
Lead
10.1 µg/L 67%
of the EPA limit 15 µg/L
4/5 SYR4
Lithium
9.1 µg/L
No EPA limit set
1/5 UCMR-5
Bromodichloromethane
7.7 µg/L
No EPA limit set
2/5 SYR4
Gross Alpha, Excl. Radon And U
7.5 pCi/L 50%
of the EPA limit 15 pCi/L
2/5 SYR4
Trichloroacetic Acid
6.2 µg/L
No EPA limit set
2/5 SYR4
Dibromochloromethane
5.2 µg/L
No EPA limit set
2/5 SYR4
Arsenic
2.61 µg/L 26%
of the EPA limit 10 µg/L
3/5 SYR4
Dibromoacetic Acid
2.6 µg/L
No EPA limit set
1/5 SYR4
Bromoform
2.5 µg/L
No EPA limit set
1/5 SYR4
Monochloroacetic Acid
2.2 µg/L
No EPA limit set
1/5 SYR4
Picloram
1 µg/L 0.2%
of the EPA limit 500 µg/L
1/5 SYR4
Chromium
0.4600 µg/L 0.5%
of the EPA limit 100 µg/L
1/5 SYR4
PFHXS
0.0342 µg/L
No EPA limit set
1/5 UCMR-5
Mercury
0.0280 µg/L 1.4%
of the EPA limit 2 µg/L
1/5 SYR4
Pfba
0.0146 µg/L
No EPA limit set
1/5 UCMR-5
PFOS
0.0120 µg/L
No EPA limit set
1/5 UCMR-5
PFBS
0.0091 µg/L
No EPA limit set
1/5 UCMR-5
PFOA
0.0081 µg/L
No EPA limit set
1/5 UCMR-5
Pfhxa
0.0074 µg/L
No EPA limit set
1/5 UCMR-5
Pfpea
0.0060 µg/L
No EPA limit set
1/5 UCMR-5
Pfhpa
0.0036 µg/L
No EPA limit set
1/5 UCMR-5
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
5/5 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Sauk Rapids

Frequently asked questions about Sauk Rapids tap water

Is Sauk Rapids tap water safe to drink?

EPA testing detected 29 contaminants in the water serving Sauk Rapids. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Sauk Rapids?

5 public water suppliers report drinking-water monitoring for Sauk Rapids, Minnesota to the EPA. Each is listed above with its population served.

What contaminants are in Sauk Rapids's water?

The contaminants EPA monitoring detected in Sauk Rapids include Nitrate-Nitrite, Fluoride, Copper, Barium, Cyanide. The full list, with the highest level found and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.