Tap WaterIndex

← Kentucky

Tap water quality report

Taylorsville, KY

EPA monitoring detected 7 contaminants across the 1 water supplier serving Taylorsville. A detection doesn't automatically mean the water is unsafe — see the level at the main supplier for each below, with its EPA source and period.

1
water supplier
22,286
people served
7
contaminants found
Kentucky rankings Lead in Kentucky PFAS in Kentucky

What was found in Taylorsville's water

The level at the city's main supplier, the highest level anywhere in the city, the EPA limit for each, and where every figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Copper
136.19999999999996 µg/L 10%
of the EPA limit 1300 µg/L
Main supplier: TAYLORSVILLE WATER WORKS · 22,286 people · 2017
1/1 SYR4
TTHM
33.019999999999996 µg/L 41%
of the EPA limit 80 µg/L
Main supplier: TAYLORSVILLE WATER WORKS · 22,286 people · 2019
1/1 SYR4
Lead
28.599999999999987 µg/L 191%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
Main supplier: TAYLORSVILLE WATER WORKS · 22,286 people · 2017
1/1 SYR4
Total Haloacetic Acids (HAA5)
17.269999999999996 µg/L 29%
of the EPA limit 60 µg/L
Main supplier: TAYLORSVILLE WATER WORKS · 22,286 people · 2019
1/1 SYR4
PFOA
0.0065 µg/L
No EPA limit set
Main supplier: TAYLORSVILLE WATER WORKS · 22,286 people · 2025
1/1 UCMR-5
Pfpea
0.0049 µg/L
No EPA limit set
Main supplier: TAYLORSVILLE WATER WORKS · 22,286 people · 2025
1/1 UCMR-5
Lead
0.0030 mg/L 20%
of the EPA limit 0.0150 mg/L
Main supplier: TAYLORSVILLE WATER WORKS · 22,286 people · 2023
1/1 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of the system's samples — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Taylorsville

SupplierPopulation served
TAYLORSVILLE WATER WORKS 22,286

Frequently asked questions about Taylorsville tap water

Is Taylorsville tap water safe to drink?

EPA testing detected 7 contaminants in the water serving Taylorsville. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Taylorsville?

1 public water supplier report drinking-water monitoring for Taylorsville, Kentucky to the EPA. Each is listed above with its population served.

What contaminants are in Taylorsville's water?

The contaminants EPA monitoring detected in Taylorsville include Copper, TTHM, Lead, Total Haloacetic Acids (HAA5), PFOA. The full list, with the level at the main supplier and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.