Tap WaterIndex

← Alabama

Tap water quality report

Millbrook, AL

EPA monitoring detected 23 contaminants across the 2 water suppliers serving Millbrook. A detection doesn't automatically mean the water is unsafe — see the highest level found for each below, with its EPA source and period.

2
water suppliers
17,283
people served
23
contaminants found
Alabama rankings Lead in Alabama PFAS in Alabama

What was found in Millbrook's water

The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Fluoride
1940 µg/L 49%
of the EPA limit 4000 µg/L
 2/2 SYR4
Copper
674 µg/L 52%
of the EPA limit 1300 µg/L
 2/2 SYR4
Nitrate-Nitrite
402 µg/L 4%
of the EPA limit 10000 µg/L
 2/2 SYR4
Nitrate
360 µg/L 3.6%
of the EPA limit 10000 µg/L
 2/2 SYR4
Nitrite
201 µg/L 20%
of the EPA limit 1000 µg/L
 1/2 SYR4
TTHM
82.6 µg/L 103%
of the EPA limit, in the worst sample — 80 µg/L
 2/2 SYR4
Total Haloacetic Acids (HAA5)
65 µg/L 108%
of the EPA limit, in the worst sample — 60 µg/L
 2/2 SYR4
Barium
35 µg/L 1.8%
of the EPA limit 2000 µg/L
 1/2 SYR4
Chloroform
21.7 µg/L
No EPA limit set
 2/2 SYR4
Bromodichloromethane
5.84 µg/L
No EPA limit set
 1/2 SYR4
Gross Alpha, Excl. Radon And U
2.8 pCi/L 19%
of the EPA limit 15 pCi/L
 2/2 SYR4
Lead
1.7 µg/L 11%
of the EPA limit 15 µg/L
 2/2 SYR4
Dibromochloromethane
1.41 µg/L
No EPA limit set
 1/2 SYR4
Gross Beta Particle Activity
0.5000 pCi/L
No EPA limit set
 1/2 SYR4
Combined Radium (-226 And -228)
0.4000 pCi/L 8%
of the EPA limit 5 pCi/L
 1/2 SYR4
PFBS
0.0730 µg/L
No EPA limit set
 2/2 UCMR-5
Pfpea
0.0270 µg/L
No EPA limit set
 2/2 UCMR-5
PFOA
0.0190 µg/L
No EPA limit set
 2/2 UCMR-5
PFOS
0.0190 µg/L
No EPA limit set
 2/2 UCMR-5
Pfhxa
0.0170 µg/L
No EPA limit set
 2/2 UCMR-5
Pfba
0.0120 µg/L
No EPA limit set
 2/2 UCMR-5
Pfhpa
0.0059 µg/L
No EPA limit set
 2/2 UCMR-5
Lead
0.0050 mg/L 33%
of the EPA limit 0.0150 mg/L
 2/2 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Millbrook

SupplierPopulation served
TRI COMMUNITY WATER SYSTEM 11,832
MILLBROOK UTILITIES 5,451

Frequently asked questions about Millbrook tap water

Is Millbrook tap water safe to drink?

EPA testing detected 23 contaminants in the water serving Millbrook. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Millbrook?

2 public water suppliers report drinking-water monitoring for Millbrook, Alabama to the EPA. Each is listed above with its population served.

What contaminants are in Millbrook's water?

The contaminants EPA monitoring detected in Millbrook include Fluoride, Copper, Nitrate-Nitrite, Nitrate, Nitrite. The full list, with the highest level found and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.