Tap WaterIndex

← Alabama

Tap water quality report

Ashford, AL

EPA monitoring detected 10 contaminants across the 2 water suppliers serving Ashford. A detection doesn't automatically mean the water is unsafe — see the level at the main supplier for each below, with its EPA source and period.

2
water suppliers
4,311
people served
10
contaminants found
Alabama rankings Lead in Alabama PFAS in Alabama

What was found in Ashford's water

The level at the city's main supplier, the highest level anywhere in the city, the EPA limit for each, and where every figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Nitrate
220 µg/L 2.2%
of the EPA limit 10000 µg/L
Main supplier: ASHFORD WATER WORKS · 3,816 people · 2019
1/2 SYR4
Nitrate-Nitrite
200 µg/L 2%
of the EPA limit 10000 µg/L
Main supplier: ASHFORD WATER WORKS · 3,816 people · 2019
1/2 SYR4
Copper
21 µg/L 1.6%
of the EPA limit 1300 µg/L
Main supplier: ASHFORD WATER WORKS · 3,816 people · 2019
Highest in the city: 143.2 µg/L — AVON WATER SYSTEM · 495 people · 2019
2/2 SYR4
Barium
28.85 µg/L 1.4%
of the EPA limit 2000 µg/L
Main supplier: ASHFORD WATER WORKS · 3,816 people · 2019
1/2 SYR4
TTHM
22.6 µg/L 28%
of the EPA limit 80 µg/L
Main supplier: ASHFORD WATER WORKS · 3,816 people · 2019
2/2 SYR4
Total Haloacetic Acids (HAA5)
9.818999999999999 µg/L 16%
of the EPA limit 60 µg/L
Main supplier: ASHFORD WATER WORKS · 3,816 people · 2019
Highest in the city: 10.125 µg/L — AVON WATER SYSTEM · 495 people · 2019
2/2 SYR4
Lead
1.77 µg/L 12%
of the EPA limit 15 µg/L
Highest in the city: AVON WATER SYSTEM · 495 people · 2019
1/2 SYR4
Chloroform
1.6825 µg/L
No EPA limit set
Main supplier: ASHFORD WATER WORKS · 3,816 people · 2017
1/2 SYR4
Bromodichloromethane
0.6945 µg/L
No EPA limit set
Main supplier: ASHFORD WATER WORKS · 3,816 people · 2017
1/2 SYR4
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
Main supplier: ASHFORD WATER WORKS · 3,816 people · 2023
Highest in the city: 0.00070 mg/L — AVON WATER SYSTEM · 495 people · 2025
2/2 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of the system's samples — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Ashford

SupplierPopulation served
ASHFORD WATER WORKS 3,816
AVON WATER SYSTEM 495

Frequently asked questions about Ashford tap water

Is Ashford tap water safe to drink?

EPA testing detected 10 contaminants in the water serving Ashford. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Ashford?

2 public water suppliers report drinking-water monitoring for Ashford, Alabama to the EPA. Each is listed above with its population served.

What contaminants are in Ashford's water?

The contaminants EPA monitoring detected in Ashford include Nitrate, Nitrate-Nitrite, Copper, Barium, TTHM. The full list, with the level at the main supplier and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.